Bambu Lab AMS 2 Pro

The Bambu Lab AMS 2 Pro is the next-generation Automatic Material System: multi-color and multi-material printing combined with a built-in 65 °C filament dryer. It keeps spools sealed and dry, rotates them while drying, feeds 60% faster with a brushless servo motor, and works with all Bambu Lab printers — including the H2D, H2S, P2S, X1C and P1S. Buy the AMS 2 Pro in Jordan from Jordan Automation.

Key Features

• 65 °C Filament Drying – Dry filament right inside the AMS, no separate dryer box needed.
• Electro-Magnetic Air Vent – Opens to discharge moisture while drying, then closes for air-tight storage that keeps filament dry for weeks.
• Up to 24 Colors / Multi-Material – Chain up to 4 AMS 2 Pro and 8 AMS HT units for 24 filaments.
• Brushless Servo Motor – 60% faster filament feeding; saves about 10 minutes per 100 filament changes.
• RFID Filament Sync – Automatically matches print and drying settings for Bambu Lab filaments.
• Tool-Free Maintenance – Direct top access to the filament tubes and hard ceramic filament inlets for long life.

Dry Filament Quickly and Intelligently

Automated venting removes moisture during drying and seals the unit afterwards, so filament stays print-ready for weeks — a real advantage in humid weather. During drying the spools rotate automatically for even results.

Automatic Drying Settings with RFID

The AMS 2 Pro reads the RFID tag on Bambu Lab filaments and applies the right drying temperature and time — no manual input needed. Dry filament means cleaner surfaces and less stringing.

Faster Multi-Material Printing

The Bambu permanent-magnet synchronous servo motor speeds up filament feeding by 60%, saving an average of 10 minutes per 100 filament changes on multi-color prints.

Evolved, Polished Design Details

Clearing a snapped filament on the first-gen AMS meant removing every spool and unscrewing the shell. The AMS 2 Pro gives direct, tool-free access to the filament tubes from the top, and its ceramic filament inlets (Vickers hardness 1200) greatly improve durability.

Compatible with All Bambu Lab Printers

The AMS 2 Pro works with every Bambu Lab printer. Some printers need an additional accessory (such as the AMS 2 Pro Upgrade Compatibility Kit or an AMS hub) depending on the setup — contact us and we'll tell you exactly what your printer needs.

Technical Specifications

ABS, ASA, PET, PA, PC, PVA, BVOH, POM, HIPS and CF filaments need higher drying temperatures than the AMS 2 Pro can reach; for those, the AMS HT dries more completely.

What's in the Box

• Bambu Lab AMS 2 Pro
• Desiccant
• PTFE tubes (185 mm ×2, 225 mm ×2, 900 mm ×1)
• Bambu Bus cable (6-pin)

Frequently Asked Questions

AMS 2 Pro vs AMS — what's the difference?

The AMS 2 Pro adds 65 °C active drying with an automatic air vent, a brushless motor with 60% faster feeding, temperature/humidity display, tool-free maintenance and support for up to 24 filaments. The first-gen Bambu Lab AMS stores filament sealed with desiccant but cannot dry it.

Does the AMS 2 Pro work with the A1 or A1 mini?

Yes, the AMS 2 Pro is compatible with all Bambu Lab printers, but some setups need an extra accessory. For a simple, lower-cost 4-color setup on the A1 series, the AMS lite is also an option.

Can I use the AMS 2 Pro as a filament dryer only?

Yes. It can dry filament while connected to the printer; when several units are used and some are only drying, those units need an external power adapter.

Why Buy from Jordan Automation (JOCAM)?

• Authentic Bambu Lab products — no counterfeits
• Fast delivery across Jordan: Amman, Zarqa, Irbid, Aqaba and more
• Setup help and technical support in Arabic and English
• Local warranty handling and Bambu Lab spare parts in stock