JamgHe Dryer Box Filament Dryer

 is a heated storage box that keeps filaments dry and dehumidifies moisture-sensitive materials. With dry filament, unpleasant printing errors such as air bubbles, warped edges or unsightly threads can be avoided and the print quality can be improved.

Adjustable temperature and fast 360° hot air heating

The dry box has a heating temperature range of 45 °C to 65 °C and is suitable for materials such as PLA, ABS, ASA, PETG, TPU, PP, PC, PC, and much more

The box heats up to 65 °C within 15 minutes. Thanks to a built-in fan, the hot air circulates 360°, heating the entire chamber evenly.

24-hour timer function and real-time monitoring

The integrated timer can be individually set from 0 to 24 hours so that the filaments can dry completely.

You can see the humidity and drying times in real-time using a countdown timer.

Wide compatibility

The Dry Box 2.0 is suitable for both 1.75 mm and 2.85 mm filaments with a max. diameter of 210 mm and max. width of 75 mm.

Other features:

• Secure power switch,

• Moisture-proof silicone plug,

• Inner chamber with heat-insulating cotton wool for protection.

Recommended use:

1. Load the filament into the dry box.

2. Feed the filament through the opening and close the box.

3. Connect the box to the power supply.

4. Switch on the device and set the appropriate temperature and time.

Included:

• 1 x Filament Dry Box 2.

• 1 x Power Cord

• 1 x Instruction Manual

• read more 

Technical specifications:

Device size237x266x99mmNet weight1060gInput voltage220V 50/60HzPerformance145WTemperature range45°C to 65°CHeating timer0-24 hFilament diameter1.75mm
2.85mm